CDS "Shot Glass Method" & Variations - HAD ANY EXPLOSIONS?
- brtanner
-
Topic Author
- Offline
- Platinum Member
-
- Accept the present moment fully...
What I'd really like to know from anyone who's experimented with this is:
Have you experienced your large containment vessel (sealed glass OUTER jar, etc.) EXPLODING from the pressure of the chlorine dioxide gas while making the CDS this way?
My operating theory at this point is that the water or other liquid that is absorbing the ClO2 acts as a pressure release valve that helps prevent the pressure building to the point where the outer vessel explodes. Possibly the pressure, as it increases, causes the gas to dissolve into the solution more efficiently.
IS THIS METHOD SAFE? In my opinion, this is important as this is a process that many people can do at home, and one that may eliminate the CDS from absorbing toxins from plastics.
I'd appreciate responses from anyone with experience with this.
Bruce
Please Log in or Create an account to join the conversation.
- pam
-
- Offline
- Platinum Boarder
-
- Posts: 4593
- Thank you received: 3706
Please Log in or Create an account to join the conversation.
- Miguel
-
- Offline
- New Member
-
- Posts: 16
- Thank you received: 4
"acts as a pressure release valve that helps prevent the pressure building to the point where the outer vessel explodes. Possibly the pressure, as it increases, causes the gas to dissolve into the solution more efficiently"
It is exactly what happen I did with 100 drops of both liquids and nothing happen no pressure at all.
Miguel
Please Log in or Create an account to join the conversation.
- Evanir
-
- Offline
- Elite Member
-
- Posts: 194
- Thank you received: 86
I placed the tightly sealed glass jar (plastic lid) with 2 cups of distilled water and the floating little glass jar containing the MMS and CA in a kitchen cupboard.
The color of the finished CDS has been very close to the color of ready-to-drink MMS1 at the 3 drops dosage. I don't have testing strips yet.
I hope this is correct Pam?
Please Log in or Create an account to join the conversation.
- pam
-
- Offline
- Platinum Boarder
-
- Posts: 4593
- Thank you received: 3706
Please Log in or Create an account to join the conversation.
- CLO2
-
- Online
- Administrator
-
Please Log in or Create an account to join the conversation.
- Sky
-
- Offline
- Platinum Member
-
- mystical adventure
I have had zero issues or concerns with pressure build-up. My only problem using canning jars has been corrosion of the ring lid. I have since bought a liter glass jar with a glass lid and a rubber ring for the seal which is closed with a wire snap tensioner. We are doing 20 drops NaClO2 28% with 100 drops 10% CA. I have measured the 100 drops CA into a measure and now just fill the measure and drop it into the shot glass.
We then place the sealed jar into a plastic basin and flood the jar with hot water up to the seal level. This then takes 3-4 hours and the shot glass is clear. Removing the CDS to a glass bottle (500ml) we add another 500ml of clear spring water and refrigerate. This gives my wife and I two doses each over two days. Leaving it int he fridge for a week leaves is in the same condition as when made.
I have since changed my shot glass for a tiny liqueur glass with a stem and foot which "stands" in the reaction jar and is more stable. The neck cross section area is 1/4 of the shot glass and this results in a slower off-gas for some reason, and I now have to re-heat the jar twice over 8 hours to get a full reaction.
Overall we love this method as since starting taking CDS - no more funny guts or diarrhea at all.
I also made a small ebook which I attach here on the system we use with the original canning jar as most folks we supply have them. Also have had nil negative feedback from any of these people.
My only current concern is the rubber seal on my "sweetie jar" seems to be cracking and will eventually fail due to the corrosivenes of the ClO2. So I will stock up on spare seals, but have averted this degradation with using cling film in the lid seal between the rubber seal and the neck of the jar with good results.
ymoahs
Sky
The mind is like a garden, if you do not cultivate it, you cannot harvest from it.
Please Log in or Create an account to join the conversation.
- pam
-
- Offline
- Platinum Boarder
-
- Posts: 4593
- Thank you received: 3706
Please Log in or Create an account to join the conversation.
- Horsefeathers
-
- Offline
- Moderator
-
- Posts: 491
- Thank you received: 322
Please Log in or Create an account to join the conversation.
- Sky
-
- Offline
- Platinum Member
-
- mystical adventure
I will visit our bulk canning supply depo this weekend to check this out.
My snap jar with cling wrap is still going well, but I would not mind going back to the canning jar as it has more volume with a bigger aperture.
To get back to Bruce's question and concern - I believe no pressure problems will be experienced should the dosage per batch made be kept below the 1 Lt and 3000ppm level for the shot glass method.
I will try a batch of 10 000+ppm in my canning jar this weekend just to check this out.
@Bruce - we should do a survey sometime to check the ratio of people using CDS and their preference methods of manufacture.
The mind is like a garden, if you do not cultivate it, you cannot harvest from it.
Please Log in or Create an account to join the conversation.
Jim's Blog
-
Why it’s Not Working
Published on: September 2, 2026
From a discussion with Jim on why MMS/CD doesn’t seem to be working: Jim: If it’s not working, do something different. But this can be tricky, you have to give each thing enough time to work, don’t be rash, but don’t stay stuck either, this is where listening to your body comes in and the …
-
Important Safety Tip on Mixing a Dose
Published on: August 17, 2026
Recently it has come to our attention that some people question if you need to take an MMS/CD dose in water. The answer is a big YES! All MMS (chlorine dioxide) doses, with whatever “variation” of MMS/CD one is taking, needs to be mixed in water. You NEVER take it straight. The standard is usually …
-
How does MMS affect bacteria in the body?
Published on: July 24, 2026
First facts, MMS does not kill friendly bacteria. What is the difference in useful bacteria and the harmful stuff? Well the feces of the useful bacteria is not poisonous and the feces of the harmful bacteria is poisonous and that is what makes one sick and causes the problems. Poisons have long chains of atoms …
-
MMS/CD and Plastics
Published on: July 12, 2026
Question: How does MMS interact with various plastics? Jim: In regards to your question about plastics, we really cannot give you a “sure bet” answer. This is because the world of plastics is vast, and like so many things in our environment, it’s difficult to know what is really what. To give you an idea, …
-
MMS/CD, Bacteria and Viruses
Published on: July 5, 2026
Question: Does MMS/CD kill bacteria and virus? Jim: Antibacterial drugs can sometimes stop bacterial [infections] diseases but medicine has yet to develop anything to stop viral infections. Thankfully, MMS/CD has been known to stop both viral and bacterial diseases. For either viral or bacterial infections, begin with the Starting Procedure and continue following the Health …
-
Importance of Following the Plan
Published on: June 27, 2026
Every week at least one new person approaches me with the question will MMS/CD help overcome some new disease. MMS/CD is an oxidizer that fits into the operation of the body in the exact right chemical balance to kill diseases and their poisons and eradicate heavy metals. Drugs must somehow attack the nucleus of the …